i charge the screen of my ipod touch 4gen but later that i conect all my ipod dont turn on and i don t see nothing the bad notice is i broke the speaker and the blue cable are not conected, but the ipod i conected to the PC and unce that other times the pc detected. i dont know what do to do the lcd, she dont turn on i dont see nothing. i need help.
Is this a good question?
Rep: 41k
15
78
89
If I got you right, when you connect the iPod to your computer, the computer sees it.
However, you cannot see anything on the screen. Right?
- If yes, then for the sake of it, try to hard reboot your iPod (press and hold Power Button + Home Button together for ~12 seconds. If you see nothing still, press on the power button to restart it).
- If rebooting doesn't help. you either have a bad screen, or the screen cable is disconnected from the board.
Follow this guide to disconnect then reseat the LCD connector. Then reboot your iPod. If that doesn't help, replace the screen.
The guide has the needed steps, tools, and links. But note that this particular repair is not hard, but a PIA in some ways.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 47
