Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1942 Questions View all

Home Button Stuck pressed down, LCD does not light up

Phone got wet with rain, home button stays pressed down so when the phone restarts the voice control appl is on...after cancelling, the home button does not operate at all...the LCD does not backlight...you can barely see it..everything else works fine...

What can I do ???

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

there are a few things you can do (or at least - try to do)

get some isopropyl alcohol (>90%) and a soft paintbrush

disassemble the iphone

clean the logicboard and the connectors carefully with the alcohol/paintbrush - all the white/greenish residue must be removed

let it dry!

reassemble it and try it again

good luck

Was this answer helpful?

Score 0

Comments:

Additionally, following most of this guide will show you how to open your iPhone 3GS and gain access to the logic board. :)

by

Add a comment

Add your answer

Gustavo will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,342