My washer stops mid-cycle and starts beeping and flashes a code: F07. I have to cancel twice, hit rinse spin, start just to open the door. The clothes are heavy wet and I tried it again with the same result. Help?
Is this a good question?
Rep: 685.3k
3.4k
1.1k
2.6k
The manufacturer has assigned this error or fault code to indicate that the machine has detected a short-circuit in the motor control unit circuit board. Check the wire harness connections between the drive motor and the motor control unit (MCU). Also, check the wire harness connections between the MCU and the central control unit (CCU). If all connections appear sound, it’s possible that the drive motor or motor control unit is defective. If the motor turns at all, change the MCU first.
Was this answer helpful?
Past 24 Hours: 1
Past 7 Days: 7
Past 30 Days: 51
All Time: 2,770
