Fix Your Stuff Community Store

Released alongside the AirPort Extreme base station, this hard drive equipped variant offers 802.11ac speed on a time capsule NAS.

56 Questions View all

Options

Want to know how the Status light wired for Time Capsule A1470

I'd received damaged AirPort Time Capsule A1470. The status light's 3 electrical wires and 3 pin connector were cut. The only "3 wires" are left inside. I wanna know how those wires connected to the logicboard.

Thanks in advance.

Block Image

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

They connect to the logic board J1700 connector which is just to the right side of the power supply connector. Here's a good picture of the connectors: Step 4 image from this teardown: AirPort Extreme A1521 Teardown which is it twin without the hard drive.

Was this answer helpful?

Yes No
Score 1

1 Comment:

On my Airport Extreme, the pin closest to the J1700 lable is common to the status LED, the middle pin is to the yellow and the farthest from the J1700 lable is t the green.

by

Add a comment

Add your answer

Mai Ichijoh will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 299