820-2532 suspected dead MCP
820-2532 no water damage, excellent physical condition
PPBUS_G3H - present
PP3V42_G3H - present
PP3V3_S5 - present
PP5V_S3 - missing
PP3V3_S3 - missing
PP3V3_S0 - missing
P5VS3_EN - missing
P3V3S3_EN - missing
PM_SLP_S4_L - missing /no signal measured with oscilloscope/
RTC_CLK32K_XTALOUT - present 32kHz
PP5V_S3 comes on when Q7210 is removed - a clear sign that P5VS3_EN is missing
I assume MCP is dead
It's a training/parts board, if MCP is bad I'll not bother fixing it
Any opinions?
Is this a good question?