Fifth generation of iPhone. Repair of this device is straightforward, and requires screwdrivers, prying tools, and patience. GSM/CDMA / 16, 32, or 64 GB / Black or White.

2901 Questions View all

Broken resistors after power chip replacement

Hi, I made a big mistake. My iPhone 4s wont charge. The problem is the power ic. So I decided to replace it with my hot air station. It was not easy so I destroyed the faulty chip and some resistors. They broke off.

I solderd the the new power chip successfully but I can't solder the resistors with my hot air station because the wont hold and blow off, even on the lowest air level.

Here is a picture from the problem

Block Image

So how can I fix the broken resistors?

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment
Deck the Halls
With tools and Fix Kits

1 Answer

Chosen Solution

Iceberg, looks like you ran into a bit of a mess. Interestingly enough, not a single resistor missing ;-) Anyhow the parts are as follows:

L28 2.2UH-1.8A-155MOHM VLS252012 fixed inductor

C605 22UF 6.3V 20& capacitor in a 603 package

C606 22UF 6.3V 20& capacitor in a 603 package

C206 1UF 6.3V 10% capacitor in a 402 package

C85 0.01UF 6.3V 10% capacitor in a 01005 package

C253 10UF 6.3V 20& capacitor in a 402 package

C282 4.7UF 6.3V 20& capacitor in a 402 package

C205 0.1UF 6.3V 10% capacitor in a 201 package

As you probably found out, replacing those is not going to be easy.

Block Image

Was this answer helpful?

Score 2

Comments:

Thank you oldurkey. But where can I buy all this resistors? I can't find any store.

by

I get mine from either digikey.com or Mouser.com

by

Thanks for your help. It seems to be impossible and too expensive for me. :(

by

Add a comment

Add your answer

Iceberg will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 172