Skip to main content

Early 2011 Model: A1278 / 2.3 GHz i5 or 2.7 GHz i7 processor

778 Questions View all

No sound - no sound devices found, audio through USB working

After water spil the logicboard is cleaned by ultrasonic cleaner.

Keyboard replaced.

All is working OK except audio.

In the settings no output and no input devices found.

Connecting a Bluetooth headset audio is OK

Connecting a USB headset audio is OK

Connecting Airplay audio is OK

only no Speakers and no Mic

what could be the next step ??

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment

1 Answer

Chosen Solution

At this point I would expect the audio logic on the logic board is damaged. Double check by plugging in an external speaker in the phono outlet. If that is likewise dead.

If the phono outlet is working then you'll need to check your speaker & microphone connections on the logic board.

Was this answer helpful?

Score 1

3 Comments:

Phone outlet is not working.

I think it is time to measure all voltages and signals around the audio IC.

by

Measuring all voltages around the audio chip made me decide to change the audio chip.

Removed the old one and placed a new chip.

Now the audio is 100% Good !

by

If this answer answered your question please remember to rate (score) and mark it accepted.

by

Add a comment

Add your answer

Rene will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 173