Skip to main content

iPod Classic 6th Generation. Model A1238 / 80, 120, or 160 GB hard drive / black or silver metal front

904 Questions View all

Still will not hold a charge after replacing battery with new one?

My ipod classic wouldn't take/hold a charge. I recently replaced the battery with a brand new one. It still will not take a charge. What else could be wrong?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

tldevey1, make sure you try a different cable and a different charger. Check the dock connector for any bend/broken pins and check for debris/corrosion. If all that looks good, check the battery connector on the logic board. this series had issues with the connector breaking of the board. Other than that you may have a bad PMIC, which would most likely mean a new logic board.

Was this answer helpful?

Score 2
Add a comment

Add your answer

tldevey1 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 50