Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1500 Questions View all
Question Closed

replaced the screen,but it's still doesn't work.

Hello !

I was one of the happiest people who had iPhone,but occasionally i drop the phone and broke the glass and screen.

through the internet i ordered new parts and replaced them.i replaced glass and screen,but the phone still doesn't work properly, it switch but on the screen shows diferent colour lanes,

what it can be ?

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

2 Answers

vertical oder horizontal lines ?

do you see only the lines or is the reular screen also there ?

did you try to reset your phone ?

(press and hold the home and the sleep button at the same time until the phone restarts - this could take around 10 seconds)

Was this answer helpful?

Score 0
Add a comment

I did the same repair to my iphone 4 (new front glass with attached digitizer). The screen now has only very small vertical lines that change from light to dark, pale blue, etc. I can't see anything but those lines. I can blindly slide the "slide to unlock" button over and hear a click and the lines will change color slightly. I can guess where to touch and hear clicking sounds, but still only see vertical lines.

The glass does not seat exactly all the way into the casing as I can see a tiny sliver of light about 1.5" long along the glass edge. I have checked the connectors as well.

No resetting/syncing attempts change it.

Thanks for any advice!

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 946