Skip to main content

Exactly RAM spec for buy : ecc? 184pin ok or 200pin better/needed?

Hello,

I would like to change the ram but i didn't get some specs needed.

Does the "NON ECC" RAM is correct ?

Does 184PIN CAN WORK INSTEAD OF THE 200PIN SELL ON IFIXIT ?

.. Or maybe 200pin RAM will work better ?

DOES 333MHZ IS EXACT RAM FREQUENCIES REQUIRED ?

.. Or this specs is not too look ?

Will old linux recognize this new ram ?

.. Or there is no link to os with changing ram

Answered! View the answer I have this problem too

Is this a good question?

Score -1
1 Comment

Here's the spec sheet from EveryMac on your system: iBook G4 1.42 GHz (Mid-2005)

by

Add a comment

1 Answer

Chosen Solution

From EveryMac: PC2700 DDR SDRAM 333 MHz

"The maximum memory capacity of this system is 1.5 GB with 512 MB onboard and a 1.0 GB SO-DIMM."

You can't force fit any memory module (physically or what it runs at). Sadly, these modules are difficult to get as they are no longer being made.

Was this answer helpful?

Score 2
Add a comment

Add your answer

Wassup Rocker will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 96