The on/off switch has fallen inside the camera.
The on/off switch of my Flip Ultra HD has fallen inside the camera. What can I do to set it back up again?
Is this a good question?
jud, you will have to disassemble your flip right down to removing the logic board. Uses this teardown to get an idea of what is involved. The outer plastic case is a pain (lots of glue) and it will never look the same:-) The on/off button is held in place by a small plastic spring piece. It may have broken off on you and that is the reason for the retracted button. Biggest hurdle on this repair is to obtain a replacement part.
Was this answer helpful?
Past 24 Hours: 2
Past 7 Days: 2
Past 30 Days: 3
All Time: 68