Fix Your Stuff Community Store

Repair information for the 4th generation iPad. Released November 2, 2012. Model numbers: A1458, A1459, and A1460.

408 Questions View all
Question Closed

Options

Replaced LCD and digitizer now LCD. No image backlight works

I bought an iPad off ebay that had a broken screen and LCD. After replacing the LCD and digitizer the LCD shows no image but the back light works. I tried a reset, reconnecting the ribbon cables and a full restore and still no image. iTunes recognizes it and it makes noise. Siri responds when I hold the home button down.

What could be the issue? Is there something that might ave shorted out?

Thanks!

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest

Options

If you take out the board, basically right underneath the LCD connector, remove the Emi shield and you'll probably see a burnt filter. Replace or jumper and it should work.

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

Is there anyone who could fix it for me for a decent price? I'm good at swapping parts out but don't have the tools to replace or bypass the filter

Was this answer helpful?

Yes No
Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 72