Rep: 1
1
I have been advised that the damaged ports (both) cannot be repaired / replaced because they are attached to logic board.
It was suggested that I could still use a usb pcmcia card.....
would any card work? how would I attach it to my computer?where do you plug it in?
Is this a good question?
Rep: 685.2k
3.4k
1.1k
2.6k
Be very careful when selecting a card to insure Mac compatibility. Do a web search for "usb pcimci card & mac" to locate cards. Here's one: http://reviews.pricegrabber.com/usb-fire...
Was this answer helpful?
Rep: 88.7k
192
260
144
You can always use a USB wireless PCIMA card or use a USB one suggested
Was this answer helpful?
Rep: 78.2k
384
96
162
Hi, Here is a link to a pdf copy of your owners manual. It will show you exactly where the card slot is located and advise you of what cards will work. Good luck. Ralph
Was this answer helpful?
I saw a link in that PDF for information on cards, www.apple.com/guide, but that link fails.
This is a copy of the original manual so I imagine that is out of date. It does however describe the type of card that is acceptable. Your recommendation is a good choice. Ralph
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 827
