7.9 inch display iPad Mini, with 16, 32, or 64 GB of storage.

612 Questions View all

Defective Connector on Mother Board?

Block Image

While removing the touchscreen/digitizer assembly from an iPad Mini, I noticed that several horseshoe shaped copper contacts in the male side (attached to the mother board)came out. I have done 30 or 40 Minis and this has never happened. Has anyone had this experience?

If so, how do I fix it?

Answer this question I have this problem too

Is this a good question?

Score 1

Comments:

Hi Michael, I guess you need to replace that part.

try aliexpress, ebay for the parts.

by

Add a comment

2 Answers

I didn't have personal experience breaking it but I have fixed someone's pins that broke it. At the time I didn't have the part in stock so I took a copper wire and shaped it in and soldered it on. Worked perfectly after that.

Was this answer helpful?

Score 0
Add a comment

All you need do is replace the damaged part,you can get it on Alibaba.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Michael will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 202