Skip to main content

iPod Classic 6th Generation. Model A1238 / 80, 120, or 160 GB hard drive / black or silver metal front

904 Questions View all

Why is my iPod stuck on the "HP dectect test" screen?

I was following ifixit steps to check the functionality of the hold button (diagnostic). The hold button is working fine (0 and 1). But now my screen is stuck on HP Detect : 0. It says press menu to continue, but when I press menu nothing happens. I have also tried pressing menu twice and several other combinations...

Answer this question I have this problem too

Is this a good question?

Score 10
1 Comment

—me to. have no idea why. it reboots fine -wasn't doing this a week ago.

by

Add a comment

6 Answers

Most Helpful Answer

Plug in the headphones (HP).

Was this answer helpful?

Score 7

2 Comments:

...........Hmmmmmmmn? Something about hindsight, and 20x20 eyesight....?!

Thanks!

by

so i should put my HP laptop away ?

by

Add a comment

need to unplug it and then push MENU

Was this answer helpful?

Score 1
Add a comment

i plugged the earphones. it says now hp detect : 1 menu to continue. i pressed menu but it does not continue.. can you please help?

any clue please e mail me at bernard_khoury@hotmail.com

Was this answer helpful?

Score 0

4 Comments:

just take out the headphones and press the menu button then BINGO!!!

by

Now it says 'Accessories Test'

FW_DETECT = 0

USB_DETECT = 1

Please plug FW

What's this mean????

by

Firewire (FW) connection vs USB connection:

https://discussions.apple.com/thread/275...

by

Turn off hold button

by

Add a comment

If it's not continuing, it didn't pass the headphone (HP) test. Ipods have a little detector that stops the ipod if a headphone isn't detected; it'll pause the song if the headphone jack is removed.

You might want to disassemble it and replace the headphone jack. If that doesn't work, it's probably a bad board.

Was this answer helpful?

Score 0

1 Comment:

after plugging it in, unplug it, then it should continue

by

Add a comment

I got mine to go to the next stage by clicking the hold switch on and then off.

Was this answer helpful?

Score 0

1 Comment:

Now it's stuck on FW DETECT : 0

There's no Firewire to plug in, so I can't test this.

by

Add a comment

Hello there. I have tried out a solution you your little problem here which was posted by Chi. You see, (HP) is abbreviated for Headphones, which is dumb but oh well, and it worked when my Headphones were plugged in and then unplugged.

Was this answer helpful?

Score 0

1 Comment:

didn't work for me.

by

Add a comment

Add your answer

alysont1 will be eternally grateful.
View Statistics:

Past 24 Hours: 3

Past 7 Days: 30

Past 30 Days: 175

All Time: 28,466