so, Hi, my iphone 5 after repear stop make a brightness more, its stop on a low level, so even if it's different screen, he just done and idk how to fix it and nobody doesen't no.. something inside a phone but what..
Is this a good question?
Rep: 47
4
2
Check and make sure no jumpers on the logic board aren't broken or missing. Try a soft reset, then a hard reset. Make sure the display connections are fully connected. Reseat them if you have to. Make sure the pins on the display connections on the logic board aren't bent or broken.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 72
Have you tried restoring it?
by Enrique perez