Fix Your Stuff Community Store

Repair information and guides for the fifth generation of iPhone. Model: A1387

2193 Questions View all

Options

White screen with lines after touching the Silentbutton cable

Hi there,

I had to change my headphonejack. Everything went fine. I could use my headphones again. After a while the silent switch didn't lock right in place. I opened the back and replaced the cable (just touched it with a repair tool) after that the silent switch worked but the screen showed white with many moving lines.

I had this befor and the only solution was to replace the display.

Why is that? I didn't touch the display or the display cables itself?

Answer this question I have this problem too

Is this a good question?

Yes No
Score -1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

I would try disconnecting the battery and then disconnecting and reconnecting the display and digitizer connections to the motherboard. Then reconnect the battery again and power on the phone. Also inspect the digitizer and display cables and check to see if they have any damage and are connected properly to the motherboard. Hope this helps.

Look at step 17 for LCD and digitizer connections: iPhone 4S Screen Replacement

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

tarsonis will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 41