Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3193 Questions View all

Gear wheel look-a-like piece left over after iPhone 4 repair.

I was following the fix it to change the power lock button, and when I removed the power lock button, then these two parts fell out. I figured out where the large piece go, but I simply can't find any images that shows a gear wheel look-a-like that I am missing.

I put the phone together and I tried to start it up, however after it showed the black screen with the apple, it never went further. So I am guessing that I need that piece.

(I then took the phone apart, and I was a bit rough with the larger piece and it's loop broke. However that is not the cause of the problems, as the problems were there before I broke it.)

iPhone 4 Power & Lock Button Replacement

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

Is the screw hole missing here?

Block Image

Was this answer helpful?

Score 1

Comments:

You are right it was the right one. Thanks a lot!

by

Add a comment

That like gear thing looks like a screw hole take a pic of the mother board and I can confirm this.. And you really should have taken the screen out when repairing this as bending the lcd cable forward like that is only asking for trouble

Was this answer helpful?

Score 0

Comments:

Thanks for considering my questions. I can't see any missing on the mother board. But do take a look, I have uploaded a couple pictures of the logic board.

by

Add a comment

Add your answer

Zarahna will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 51