Fix Your Stuff Community Store

The third generation of the Apple iPad, released on March 16, 2012. Full 4G and Wi-Fi model repair guides. Repairs require heat and careful prying. Model numbers: A1416, A1430, and A1403.

310 Questions View all

Options

Digitizer causing multi and phantom touches.

About a year and a half ago I cracked my digitizer, I replaced it myself and it has worked fine since then. Recently though I have been getting multi touches (press Z and get zzzzzzzz) and phantom touches randomly dragging and touching my screen.

I took it apart and cleaned both sides with a cleaning cloth. The ribbon looks fine, and contacts look fine but the problem still persists. I'm unable to figure out what other problems it could be.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

The digitizer can just go faulty if with a small drop and I assume you replacement screen was a copy screen so it's likely to go faulty and not as resilient as an original screen

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Philip Bremer will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 97