Problem: Reassemble MacBook. Do I have to "glue" the microphone back?
Like in this case where you have "destroyed" the previous glue, when taking of the logic board. What should I do with the mic?
Is this a good question?
Score
-1
183062
1 Answer
Chosen Solution
Rep: 685.3k
3.4k
1.1k
2.6k
I just use a plastic probe with a slightly blunted tip to push it into the hole. It's a tight fit and really doesn't require glue to hold it place.
Was this answer helpful?
Score
2
Alright thanks :)
