Skip to main content

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2521 Questions View all
Question Closed

Replaced my display assembly on my iPhone, now nothing works

So I shattered my iphone and needed a whole new screen assembly. I got one with new cables, home button, & camera just to be safe. I put everything back together. (I'm 99.9%) I did it right, but now the touch screen won't work. Home button works, lock button, volume, and the little ringer switch work. But the touch screen won't. I have no clue why & I need some help.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

Try reseating and cleaning the screen connectors on the screen and logic board. If you are still having problems you should try another screen.

Was this answer helpful?

Score 1

1 Comment:

what could I use to clean it ???

by

Add a comment

The cables can be very sensitive ,im pretty sure its not quite seated properly .

As above take it apart and check as the digitizer is the first 1 to connect when you put it together and it really dosnt take much to disconnect while doing the other cables

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 73