Skip to main content

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1158 Questions View all
Question Closed

After replacing the battery, phone wont hold a charge-what is problem?

after replacing the battery, the phone would no longer power up or respond to any button pushing.

i tried soft reset, hard reset, plugging it into the computer, letting it charge... everything. the phone is still an expensive paperweight.

the only response i can get from my phone is when plugged into a wall outlet. when i press the power button, the apple appears for about 15 seconds and then goes black. after going black, you can see where the screen appears to be on for just another second or two (like a screen burn on old tvs) and then it goes completely black (like the phone is off)

Please help

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Looks like new battery is not working or not connected to mainboard.

Howto test :

Plugin to charger. Unplug it when you see the apple logo.

If it goes black after unplug it means new battery is not good or not well connected to mainboard.

The good battery should still show apple logo after unplug the charger.

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 123