Sixth iteration of Apple iPhone, announced on September 12, 2012. Repair of this device is similar to the previous models, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 32, or 64 GB / Black or White.

3053 Questions View all

Signal loss after LCD swap iPhone 5

Has anyone experienced any loss of signal after replacing the LCD assembly? I just swapped mine out and now my phone will not go any higher than 3 signal bars..

I have done reboots & reset all network connections.

Just curious if there are any contacts I may have touched to caused this? Similar to iphone4's wifi & 3g.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Make sure you didn't touch the lower half of the logic board

Was this answer helpful?

Score 1

Comments:

I'm pretty certain I did not touch anything.. I was unable to put the metal plate that goes over the LCD connectors. I could not for the life of me get it screwed in without the lower cable popping out.

Hope that is not the cause..

by

Hook up the bracket from the left side.

by

Add a comment

Add your answer

Steve will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 133