Fix Your Stuff Community Store

Model A1013, A1052, A1085, or A1107 / 1440x900 screen resolution

121 Questions View all
Question Closed

Options

PB won't start-up after reassembly & resetting keyboard

I took it apart again, reseated the keyboard connection, checked the on-button connection, and reseated the trackpad connection. No change. Say, what's the problem with scotch tape. I replaced the torn up yellow tape with it. Gulp! Thanks

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
2 Comments

Why did ou open it up in the first place? What did you do?

by

I was changing out the keyboard. Six keys stopped working after it got wet last summer. Also, the display data cable is going. It was crimped at the hinge and display was going in and out. Changing it is a BIG deal to me, as the keyboard proved. Looking at used Mac Pros. I bid contracts off plans on my laptop, so need the big screen. Thinking it's time to give in. Opinions? Thanks

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Connector

If the connector was not torn loose check the alignment of pins... Given a known good keyboard the connector is the point source failure... if the replacement was a used keyboard could be switch or wiring faults.

If you want a larger screen a new box is the only way to get one.

If this answer is acceptable please return and mark it.

Good Luck,

N.

Was this answer helpful?

Yes No
Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,097