Skip to main content

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Questions View all
Question Closed

iPhone 4 turns off after few minutes (liquid, logicboard)

Hello,

I got a iPhone with all markers red and repaired everything there (was really a lot of things). Connectors were full of patina (battery, LB) ...

Now it turns on and works, but I have a few Problems with it:

1. It is a Jailbroken pre iOS 7 (I think it is iOS 6) device and the settings crash once I start them. A week ago they suddenly worked, now again they don't. Thus I can't access WiFi or other things. Cydia isn't installed, Appstore won't start because of no internet connection (SIM-lock as well)

2. After some minutes (it seems like it is more or less always the same time) it turns off. Since it has a 3rd party LCD you can see how it is fading out.

I put that LB in another iPhone and the error persists.

EDIT: After a few hours in a isoprop bath error remains. Cleaned patina even below shields

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

I personally would start by trying to undo the jail break. If that is even possible

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 156