A unibody aluminum generation of the Mac Mini identifiable by the model number A1347, spanning the Mid 2010 to the currently sold Late 2014 model.

575 Questions View all

Mac Mini 2010 won't power on

Hi,

I replaced my hard drive (2nd time) to a new a SSD. When I put the Mini back together I cannot get to boot. Not power at all. I've checked all connectors. It's like it completely died!. Am I missing something? What's the most basic setup needed to power on?

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment

1 Answer

Chosen Solution

Well, you could disconnect the HD to see if for some reason it's bad.

Bricked systems are always tricky to diagnose without a schematic and a good DVM to test out voltages.

For now disconnecting the subassemblies (HD, memory, optical drive) to remove them from the picture while limited is all one can do without having a working spare system to swap parts out with, and no access to schematics & DVM.

Was this answer helpful?

Score 2
Add a comment

Add your answer

Jesse will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 187