Skip to main content

Repair information and guides for the fifth generation of iPhone. Model: A1387

2189 Questions View all
Question Closed

I have two parts left after display replacement (iPhone 4S)

I had to replace my iPhone 4S's (64GB, black, bought in Europe) display and I did that by following this great guide: iPhone 4S Screen Replacement

Everything worked fine so far, but after reassembling the device I had this two parts left:

https://www.dropbox.com/sh/kigbfwilvkbbe...

(same images as attached but second image with huge resolution for more details)

Does anybody have any idea where these could come from? In what step I may have missed them? Or even what they could be?

Even after re-reading the guide I have no clue where these parts come from... I think they might have fallen out at some point.

The phone works great without them btw ;)

Thank you very much in advance!

Best,

Michael

Answered! View the answer I have this problem too

Is this a good question?

Score 0
1 Comment

Thank you very much! Worked perfect :)

by

Add a comment

1 Answer

Chosen Solution

Piece one goes here:

Block Image

Place the Logic Board, then slide the piece underneath the logic board. The screw will hold it there.

Look here to see how to place the other:

iPhone 4S Silent Switch Replacement

Image by iFixit

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 143