Fix Your Stuff Community Store

Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

218 Questions View all
Question Closed

Options

Why wiill it not boot after new digitizer fitted?

I have just replaced a digitizer front screen on a friends iPad 4.

It was working fine before I did this, the screen was just cracked.

Now I get [NAND] find flash media and keepout 601 physical block off set .... there are about 5 to 6 lines all starting with NAND, The Apple logo is in the centre of the screen.

The only way I can turn the machine off is holding down the home button and sleep bottom together.

Help! Many thanks Dan

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
1 Comment

check my answer below

by

Add a comment

3 Answers

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

we have the same problems please help!

Was this answer helpful?

Yes No
Score 1

1 Comment:

looook below!!!!!!

by

Add a comment

Options

you want an answer ,??? no prob!! check the 3rd connector of camera disconnect it ,remove battery ,reassemble it again W/O THE CAMERA CONNECTOR IN !! and try

if still issue remains ---try a new lcd full set! and if its still with the nand error of kernel panic !!!

check the------------->>>> u2 chip!!!!!!!!!! and cover the whole board with tape so that there wont be any connection to the back lcd bezzel aluminium cover!!

http://i00.i.aliimg.com/img/pb/465/292/6...

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

Has anyone tried this fix from Masta at all and can you advise more on method and outcome please?

Was this answer helpful?

Yes No
Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 385