2.2, 2.4, 2.5, or 2.6 GHz Core 2 Duo processor

919 Questions View all

problem re-seating the Graphics card on the logic board

this is my second question on the same problem. i was able to successfully recover the use of the display after removing the logic board and heating and re-seating the graphics card. However,i have done this twice now and each time the 'fix' only lasts for a few hours and then the screen suddenly goes black. question; how hot should i be getting the graphics card in order to permanently re-seat it so it will stay fixed.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

That's the problem with home repairs of ball joint chips. Sometimes it works-sometimes not and there is always a risk of destroying the logic board. There are a number of companies that have the equipment to do a proper repair for around $50. If it were my board I would google the problem and send it to be repaired. Ralph

Was this answer helpful?

Score 0

Comments:

The following URL list a number of companies doing this type of repair. Ralph

http://www.google.com/#hl=en&source=hp&q...

by

Add a comment

Add your answer

afs2 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 1,476