Computers that generally don't include an integrated display, and are meant to be stationary.

1054 Questions View all

"no signal" message on monitor

My PC is running on Windows 7. While using pc, it abruptly shows "no signal" on monitor. going out of control. Even If we press reset button also, it won't reset. Forcebly, switch off the system. What will be the problem?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

Browse Our Store

1 Answer

Chosen Solution

MadhuSudhan Rao, not sure what you mean by "going out of control". It is entirely possible that you either have a bad video card, which may stop sending a signal, a bad cable/connector from the monitor as well as a bad video board in your monitor. Check the monitor on a different computer. If it works without a problem. you know that it is not the part that is failing. run Windows in safe mode and see if that makes a difference. If it does, you know it is software (most likely settings) related. If it does not make a difference, replace your video card. It will also help if you tell us what make and model your computer is, as well as what video card you are using. Hope this helps, good luck.

Was this answer helpful?

Score 1
Add a comment

Add your answer

MadhuSudhan Rao will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 48

All Time: 780