Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3197 Questions View all

I need someone's help! Which screws go where?!

Basically, I purchased 2 new replacement parts; the power button/proximity sensor cable and the volume button/vibrate replacement parts. I followed the tutorials and stripped my phone down as they said how to do so, I have now replaced the parts and put them in place, however I have lost a few screws along the way, and I don't know which ones.

So I decided to buy a replacement set of screws, thinking that they would all come separately and with the same types of screw together, however they all just came in a little bag all mixed up and I have no idea which ones are which mm! I just need someone to tell me/show me/describe to me the different types of screws there are, and even more importantly WHERE THEY GO!!!

I have looked at similar questions however did not find a great answer, I am quite capable of putting the phone back together myself and fixing it, however I have no idea which screws go where, any help would be greatly appreciated.

Thank you

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

David, you need to get something to measure the screws for sure. they are to similar to guess;-). If you take a look at the guides, like this one, read the descriptions on the right. The length of each screws is given. It might be a bit tedious but it is the proper way to go.

Block Image

Was this answer helpful?

Score 1
Add a comment
Most Helpful Answer

http://www.youtube.com/watch?v=WlMVScG-3...

Hope this helps

Was this answer helpful?

Score 1
Add a comment

Add your answer

David will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 3

Past 30 Days: 10

All Time: 5,372