Skip to main content

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1505 Questions View all
Question Closed

No sound from the earpiece but speakerphone works

Hi I just replaced my rear panel, I had to totally dissembled the whole device. After putting everything back togher, I cannot hear anything from the earpiece during a call, the speakerphone works.

I checked every connection and also double checked cable #3.

I also plugged and removed headphones into the headphone jack numerous times (searched google and this could be a remedy)

I also lost a screw but it doesnt look like it makes any contact with anything.

Third red circle I lost the screw thats next to the orange circle.



Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

i think you mean the bottom row on that picture - right?

Block Image

the screw should not be the problem.

does the proximity sensor work??

most problems are related to cable/connector 3 - but it's also possible that the earpice is faulty.

Was this answer helpful?

Score 0
Add a comment

Hello i was having the same issue, and the solution is little tricky

but works for me ....

when you connect the number 3, pull the connector cable a little backward

just a little (like 0.8 mm or 0.5 mm) and flip down the white plastic tab

Repeat this until you heard something

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 3,348