LCD Replacement does not detect/register touch?
Hi guys, I recently bought a 3rd generation iPod Touch off of eBay. It was stuck in this plastic slider case and I could not take it out for the life of me. While trying to take the case off I shattered the digitizer.
I bought a replacement digitizer and ended up breaking the original LCD during the repair process. So I bought a replacement LCD off of eBay and replaced it with the broken one. The screen powered on, but it did not detect or register any of my touches.
I sent it back and got another LCD today in the mail, but I still have the same problem. I have not decided to put the digitizer on as I have seen videos where the repair guy touches the actual LCD to make sure the touch works..
The connector port is not loose and I reasearched and the answer seems to be that the motherboard is faulty. What I don't understand is that the touch worked on my broken lcd originally so I don't think thats it. I am desperate.
Does anyone know whats going on?
PS: I have also rebooted the iPod many times, I haven even restored it under DFU mode and plugged in some headphones as other posts have suggested, still nothing.
Is this a good question?