Model A1225 / Mid 2007 and Early 2008 / 2.4, 2.8, or 3.06 GHz Core 2 Duo processor

447 Questions View all

First three LED lit but nothing shows on the LCD?

I've replaced the HD and one memory chip 2GB for a 4GB now nothing powers up except the DVD disk drive.

I cannot hear the HD even begin to power up and spin even though the power seems to indicate there is a 3rd LED diagnostic bulb lit. Any ideas as to how to proceed?

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment
Deck the Halls
With tools and Fix Kits

1 Answer

Chosen Solution

I think you'll need to open your system up again and check your connections.

Did you have a hard time disconnecting any of the cables? you could have damaged LDVS cable or connector on the logic board.

Was this answer helpful?

Score 1

Comments:

No the connectors seemed to come right off - I dicsconnected the HD and the comp did not even acknowledge being void of memory with a ? mark

by

Add a comment

Add your answer

rsensei99 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 223