Rep: 23
2
4
Hello All,
So I replaced the screen to an AT&T iPhone 4 and the phone will only go as far as booting up to the Apple Logo and does not do anything else... The Apple logo stays on for about 30 seconds, the screen goes black and then the Apple logo comes back on for about another 30 seconds and continues this process....
Is this a good question?
Rep: 37.6k
22
51
42
I think you have damaged the battery during the install.
Try another battery and see if that sorts it
Was this answer helpful?
Thanks Con... It was a friends' sons' phone I was fixing which he tried doing himself... The battery was definitely the issue... Thanks...
discconect your phone from the computer, wait for it to power off again, then hold the home button down and plug it in, hold the home button until itunes asks for a restore, then let me know how it goes, I have this problem with a 4, might be the battery or a loose connection are my suspects so far, Keep on rocking in the free world.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 487
2 Comments
Thanks Con... It was a friends' sons' phone I was fixing which he tried doing himself... The battery was definitely the issue... Thanks...
by rayrod354
rayrod354, if the answer from con helped you to resolve your issue, all you would have left, is to accept it as the most appropriate answer. That way anybody that has the same problem as you did, will know what works. Great job.
by oldturkey03