Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3248 Questions View all

won't turn on after opening and cleaning home button

I took the phone part using the guide on this site, I cleaned my home button of dust etc and put it back together reversing the steps in the guide.

Now when I went to turn it on (and was planning on being very proud of myself) nothing!

I can see the screen goes to very dark blue, (so some response) but it will not do anything else. I have tried a hard reset but this doesn't do anything but the vague 'lighting up' as I described above.

I hope I can solve this with someones help because i tried this DIY because I cannot afford a new phone (and i was beyond warranty)

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Make sure you have the LCD connector seeded correctly on the top!

Was this answer helpful?

Score 0
Add a comment

Add your answer

Maaike van der Linden will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 53