Allan Jones responded to my inquiry on Apple support community post on 5/4/13.
I am located near Madison, WI. He suggested finding someone who could solder the connector to the board. Any suggestions?
Is this a good question?
Rep: 685.3k
3.4k
1.1k
2.6k
First read through this guide: Soldering Skills
Next order this:
and this:
[linked product missing or disabled: IF145-018]
Never pay for soldering again.
Was this answer helpful?
Also get: fine point replacement tips, desoldering braid and some practice boards (you'll want a lot) it's easy to burn up the board & traces. (See why I said it might be smarter to pay someone to do this?)
Rep: 116.3k
66
68
359
Use the yellow pages or google for electronics repair shop. Soldering component boards (and disassembly of that sonic sealed uint) is not an easy DIY project.
Good Luck
If this Answer is helpful please remember to return and mark it Accepted.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 468
