Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

572 Questions View all

Upgraded HD, won't recognize new Toshiba 2TB HD

Replaced the original Toshiba 250MB HD with a Toshiba 2TB SATA 6 Gb/s HD, I used disk utility and copied with super duper, still won't find drive. stops at white screen with file folder and question mark. what do I need to do? thanks

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Jumper down your drive or replace it. You're trying to run a SATA III drive on a SATA II connector. When upgrading there's more to buying parts than a name. All RAM and HDs are not the same. You have to match them to the system.

If this Answer is helpful please remember to return and mark it Accepted.

Was this answer helpful?

Score 3
Add a comment

Add your answer

genoa140 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 202