Skip to main content

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

2347 Questions View all
Question Closed

Inside corner screw hole missing on wi-fi antenna

Screw got stuck so I tried getting it out, must have tried too hard as the little circular hole came off that was fixed to the logic board. I still have the piece that came off, it's like a donut shape, is this fixable? How bad is my problem??

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Just place the donut nut on the logic board held by the small pressure contact of the logic board. Then put the Wi-Fi Plate in place and put the screw in. If the donut nut spins hold it with tweezers or the tip of a pin. This nut and screw are not important for any function.

Was this answer helpful?

Score 1
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 155