The Sony Cybershot DSC-W55 was released in early in the year 2007. It is upgraded with a 7.2 megapixel camera compared to the previous model's 5.1 camera and has 56mb of internal memory.

22 Questions View all

Flash does not work!

Turned camera on and heard a loud pop. Removed and charged NP-BG1 battery. Reinstalled charged battery, but battery discharged rapidly. Bought new NP-FG1 battery, charged battery, installed battery and got "E91:01 error code with flash symbol flashing on LCD screen. Camera takes pictures, but flash does not flash. I suspect the capacitor blew when the loud pop was heard. Any suggestions?

Where can I buy a replacement capacitor without buying the entire flash unit?

THANKS in advance.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Deck the Halls
With tools and Fix Kits

1 Answer

Chosen Solution

Dick, the error code that you are getting is related to an issue with the flash or light on your camera. There are a two things that may have made that noise, Either your flash bulb, or your flash capacitor. Follow [http://he error code that you are getting is related to an issue with the flash or light on your camera. It's usually just replacing the flash bulb on the camera,|this guide] to either replace the capacitor or the whole assembly. the part numbers are as follows:

1-479-663-31 FLASH UNIT

1-112-819-11 ELECT 97uF 315V Capacitor

you can get it from here

A-1231-877-A ST-133 BOARD, COMPLETE

Block Image

Hope this helps, good luck.

Was this answer helpful?

Score 1

Comments:

THANKS "oldturkey03", I plan to disassemble the camera and investigate further this week. Dick

by

Add a comment

Add your answer

Dick will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 9

All Time: 608