Do I need to reheat the new adhesive after replacing the screen?
Is this a good question?
Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.
I would especially if you did not clean the old adhesive off.
Reheat then take your thumb and run it around the edges to help it seal better.
If you haven't put the screen on yet I would double up on adhesive around the digitizer cable. It help it stay down longer
Past 24 Hours: 1
Past 7 Days: 6
Past 30 Days: 12
All Time: 1,177