Fix Your Stuff Community Store

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Questions View all
Question Closed

Options

Front camera shutter Froze...

I was recently changing the display on an AT&T iPhone 4 and noticed that when trying to use the camera the shutter remained frozen when attempting to snap a picture... So, I read that It could be a software issue... It was on 5.0.1 and upgraded to 6.0.1 and still same thing... Then saw that I might need a jumper between two contact points... tried this and nothing... What to do? Maybe my jumper was not good enough... I need help asap.. Never had this happen...

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

First make sure the camera is plugged into the logic board correctly, your not real clear on your jumping on the board so to give you an idea this is what I usually use to jump circuits on the board, it works very well, http://www.amazon.com/CircuitWriterTM-Pr..., if that isn't the problem I would try replacing the Camera, good luck, If this Answer is helpful please remember to return and mark it Accepted.

Was this answer helpful?

Yes No
Score 0

1 Comment:

Thanks Mitch... I tried changing the camera and nothing... I tried having someone solder a jumper but the board wouldn't hold the solder so used the circuit writer pen and still nothing... I'm done... Sucks...

by

Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 354