Repair guides and support for cars and other vehicles produced by the Chrysler division of the Fiat Chrysler Automobiles US LLC.

78 Questions View all

Remove jigsaw blade stuck in ignition of Chrysler Voyager 2000?

My son stuck a jigsaw blade into my chrysler ignition. Please help me.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Answer

Chosen Solution

Gregory Herrera, if you can not pull out the blade with a pair of needle nose pliers, I would definitely change the lock cylinder. Here are some great instructions on how to replace a Ignition Lock Cylinder on Chrysler/Dodge/Jeep Vehicles. Some more instructions on here. Hope this helps, good luck.

Was this answer helpful?

Score 2
Add a comment

Add your answer

Gregory Herrera will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 399