Fix Your Stuff Community Store

Repair information and guides for the CDMA version of the fourth generation iPhone. Model: A1349 / 8, 16, or 32 GB storage capacity

295 Questions View all
Question Closed

Options

After taking apart my Power button it wont click anymore?

Hey ,

So I recently purchased a used midframe with parts from ebay

everything worked but the power button would not click so I toook the two screws which held the button in place and i couldnt figure it out

So i did the same to another midframe I had which did click to see any diffrence

After putting the one the clicked back together it refuses to click

its just like the one that didnt click and I cant figure out whats wrong with it

the black dot is there and I followed the guide on ifixit and it WAS working

Someone please help me

thanks alot

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
1 Comment

When you use the Pwr button, even though it doesn't click, does it work like it's supposed too ?

by

Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

screws could be too tight

Was this answer helpful?

Yes No
Score 1
Add a comment

Options

I just replaced a power/lock button on a friends iPhone, and I can 95% guarantee you that you have the screws too tight. The screws on an iphone should be hand tight for the most part. Try removing the internals again and leaving the power/lock button installed. Now back the screws out in small increments. This should illustrate that loosening the screws will allow the button to operate.

Was this answer helpful?

Yes No
Score 1
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 880