Skip to main content

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 Questions View all

Wifi not working after Digitizer replacement

I replaced the ipad2 screen and digitizer and all was working well the 2 days following the repair. Three days later, the ipad is not connecting to wifi.

Has anyone else had this issue? Can this issue be fixed without reopening the ipad?

What's my best solution? Should I start over and buy a new ipad?

Thank you!

Answered! View the answer I have this problem too

Is this a good question?

Score -1
Add a comment

1 Answer

Chosen Solution

Jessica no wifi after a digitizer replacement is very common if you don't change the wifi antenna along with the digitizer, it's a little curious that it worked for 3 day's though, I would get a new antenna and replace it, https://www.gounlock.com/search.php?prod..., a link to the part, you should also make sure your blue tooth is working and if its not order a blue tooth antenna at the same time if necessary, it also gets ripped out real easy during a screen replacement, you can also get the blue tooth antenna on here, http://www.ifixit.com/iPad-Parts/iPad-2n..., good luck, If this answer was helpful please remember to mark it accepted.'

Was this answer helpful?

Score 0
Add a comment

Add your answer

Jessica will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 3,034