5th generation of Toyota's modern full-size sedan.

80 Questions View all

Why won't my sterio work?but did before?

i put a cd player in my car before and switched it out for a newer cd player.now that i put a new one in it won't work.i double checked to make sure all wires where right and fuses...What else could it be for it not to work?

Answered! View the answer I have this problem too

Is this a good question?

Score 1


Is it an aftermarket stereo or a Toyota brand? Do you use an amp with it? What was the issue with the old one? You just replaced it to go with a newer player?


i just replaced the stereo for a newer one. there is no amp connected.ok i will check the wires again..thank u both very much


Add a comment

Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

Browse Our Store

1 Answer

Chosen Solution

First thing I would do is test the power wire to the stereo with a volt meter and see if you are getting 12 volts from it and at the same time make sure the Ground source is also working, if that is good I would look for a fuse that is in the stereo itself and see if it's good, if that's all good then I would have to think the stereo may be bad.

Was this answer helpful?

Score 0
Add a comment

Add your answer

gamesnotwar will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 292