Fix Your Stuff Community Store

Model A1046 or A1095 / 1280x854 screen resolution

118 Questions View all
Question Closed

Options

How to reconnect bluetooth cable unplugged?

When replacing my hard disk with one of your online guides I noticed the bluetooth cable that runs up towards the monitor came was unplugged from the little silicon board that was taped at the front of the laptop chassis. I could not determine how to reconnect it as the interface was very unfamiliar to me. The instructions on replacing said "Unplug Bluetooth cable".

Can you elaborate on how to reconnect this? Does it need to be soldered?

Thanks!

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

If the item that you are talking about is like the one in the photo below it is not a part that is meant to detach from the board. So if it is detached you will need to take care in repairing it. If you have to re-solder it remember it is coax lead.

If it is at the leading edge of the computer there is a metal shield around the cable that plugs into the small round port with a center lead in it on the board. If you broke the lead from the shield end when you disconnected it you may want to replace the antenna assembly as it is very hard to find and repair the cable end.

Let us know and good luck

Was this answer helpful?

Yes No
Score 3

1 Comment:

nice answer +

by

Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,912