Model No. A1367 / 8, 16, 32, or 64 GB capacity

1297 Questions View all

White screen after replacing LCD?

Before I closed the ipod up I turned it on to make sure everything was working and they all were. So I snap the glass on and next think you know the screen is white. Can't fix it from home + power, volume + home + power, or restore. Any advise would be great. Checked connections several times and have tried another screen

Answer this question I have this problem too

Is this a good question?

Score 1


DFU mode restore didn't work. Not sure what to look for on the logic board. I compared the area on the right of the lcd connector to that of a new ipod and they looked the same to me. The connectors aren't missing any pins


Add a comment

Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

Browse Our Store

1 Answer

Most Helpful Answer

If you have tested with another LCD and having the same issue and all connections are proper then you might have a bad logic board. Some things you can try DFU Mode then restore. Test to make sure the LCD works. if the DFU mode restore didn't resolve and the LCD is working then your logic board is what i would look at next.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Doug will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,151