hi, i need some help, i install a new screen because the old get broke, so, when i install the new screen it doesnt work it gets black screen, but some times when y take it off and put it again it gets white screen, so what i think (and im sure) is that the dock connector is dirty PLEASE help me how can i clean it?
Is this a good question?
Rep: 782.2k
1.1k
893
2.3k
carlos, just clean it the same way you would clean a water damaged iPhone. Use this guide to get it done. Make sure that you take a close look at the connectors, ensure that the contacts are not bend or broken on both ends of the connector. Hope this helps, good luck.
Was this answer helpful?
hi broh.. i clean all the Logic board but the screen keeps in white i dont know what to do please help me i need this phone, one more thing, it doesnt charge can be the dock connector?
How did you clean it? What else have you tried? If it does not charge, start by replacing the battery. Have you checked the connectors? Have you made sure you have a 3G and not a 3GS screen?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 369
