Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3185 Questions View all

Charging is not supported with this accessory

My iphone 4 started giving me this error message. Following the instructions given in other questions, I started by cleaning dock. I then replaced battery, no difference. I then replaced dock connector, still same error message. I don't know what to do next.

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment

2 Answers

Most Helpful Answer

DANETERRELL3the usual way to dela with that is by

1.try other USB cable,or charger.

2.Replace dock flex connector.

3.Reball/Replace PMIC.

Anything after that could be turning into a board level repair, due to failed SMD components, like the diodes. Hope this helps, good luck.

Was this answer helpful?

Score 1

Comments:

Can't seem to find guides on dock flex connector or PMIC. Starting to wonder if not better off replacing phone?

by

PMIC=Power Management IC

dock flex connector= the cable on your dock connector. Check the connector on the board. Are you pretty handy with a multimeter and a soldering station?

by

Add a comment

I am having problems with my iphone as well. It kkeeps saying charging is not supported with this device. I have tried restoring it and a lot of other methods online. I also read that it could be the dock connector. I was just wondering if anyone knew any other methods to make this go away before i buy a new dock connector. Any input would be greatly appreciated thanks sandy.

Was this answer helpful?

Score 0
Add a comment

Add your answer

DANETERRELL3 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 7,966